Steel layer-stranded cables

DIN 48201-3, EN 50182, CSN024305

 

Steel layer-stranded cables are mainly used as earthing and lightning arrester conductors. Layer-stranded cables are made of galvanized steel wire with a galvanized surface, and with single or multiple layers of strands. The stranding direction of the outer layer of the cable is always to the right. The layer-stranded cables can be delivered according to MSZ, DIN, BS etc. standards.

The table below shows the technical parameters of the stranded cables according to MSZ 48201 standards.

termékek acélsodratok 1
termékek acélsodratok 2
termékek acélsodratok 3
termékek acélsodratok 4
Nominal section
mm²		 Actual section
mm²		 Wire diameter Number of wires/td>

Stranded wire diameter
mm		 Weight
kg/km		 Calculated tensile strength, kN ST II. Calculated tensile strength, kN ST III.
25 24.25 2.1 7 6.3 192 15.89 30.40
35 34.36 2.5 7 7.5 272 22.52 43.08
50 49.48 3.0 7 9.0 391 32.43 62.04
50 48.36 1.8 19 9.0 384 31.69 60.65
70 65.82 2.1 19 10.5 523 43.14 82.53
95 93.27 2.5 19 12.5 741 61.13 116.90
120 117.00 2.8 19 14.0 930 76.69 146.70
150 147.10 2.25 37 15.7 1171 96.42 184.40
185 181.60 2.5 37 17.5 1447 119.00 227.70
240 242.50 2.25 61 20.2 1935 158.90 304.10